If you’re like most people, you probably don’t give your driveway much thought – until it starts to look dirty. Then, all of a sudden, it’s all you can think about!
The driveway is one of the first places that guests see when they come to your home. That’s why it’s important to keep it clean and free of dirt, leaves, and other debris.
If your driveway requires a good cleaning, pressure washing is the way to go. But before you start spraying away, there are a few things you should know. Here are eight pressure washing tips that will help you get the job done right:
1. Choose The Right Pressure Washer For The Job.
Not all pressure washers are created equal. You’ll need to select one that’s powerful enough to handle the task at hand, but not so powerful that it could damage your driveway. 2000-3000 psi is generally sufficient for most driveway cleaning jobs.
If you have a small driveway, you won’t need a very powerful pressure washer. But if you have a large driveway or one with a lot of concrete, you’ll need a more powerful machine.
2. Use The Right Nozzle.
There are different nozzles for different jobs. Make sure you use the one that’s best for pressure washing your driveway. Different nozzles produce different results.
A 0-degree nozzle will give you a narrow, concentrated stream of water that’s perfect for removing stubborn stains. A 40-degree nozzle, on the other hand, will provide a wider spray pattern that’s ideal for general cleaning.
3. Set The Pressure Washer To The Right Pressure.
If you set it too high, you could damage your driveway. If you set it too low, you won’t be able to remove all of the dirt and debris. Start with a lower pressure setting and work your way up. This will help you avoid damaging your driveway while still getting it clean.
4. Pre-Treat Tough Stains.
If you’re dealing with oil stains, rust stains, or other tough to remove blemishes, it’s best to pre-treat them with a cleaner before pressure washing. This will help to loosen the grime and make it easier to blast away.
5. Work From The Top Down.
When pressure washing your driveway, start at the top and work your way down. This will prevent streaks and ensure that all areas are evenly cleaned.
Hold the nozzle about 12 inches from the surface of your driveway. This will help ensure that you don’t damage the concrete or asphalt.
6. Move The Wand From Side To Side.
To avoid leaving behind streaks or lines, be sure to move the pressure washer wand from side to side as you clean.
7. Keep The Wand Moving.
Move the pressure washer in a back and forth motion. If you keep the wand in one spot for too long, you run the risk of damaging your driveway. So, be sure to keep the wand moving at all times.
8. Rinse Thoroughly.
After pressure washing, rinse the area with clean water to remove any remaining soap or cleaners. Otherwise, these products could cause streaking or other problems.
9. Let It Dry.
Before using your driveway, be sure to give it ample time to dry. Otherwise, you could be tracking wet dirt and grime into your home.
Following these pressure washing tips will help you get your driveway clean quickly and easily. But if you have any questions, be sure to consult with a professional before you begin.
They can help you choose the right pressure washer and nozzles for the job, and they can offer additional tips on how to get the best results. Or you may navigate to these guys.
